INMIG – COMBO – 403i /503i

INMIG – COMBO – 403i /503i

INVERTER BASED MULTI-PROCESS WELDING MACHINE MODEL COMBO - 403 I / 503 I

COMBO series machines are multi process machine with CC / CV characteristics. These machines use advanced soft-switching IGBT based inverter technology. Theu are widely used for GMAW/FCAW welding and SAMW welding in acid and basic electrode. They can also be used for GTAW (Scratch start) in all metals except AI, Mg and its Alloys.

FEATURES

  • Advanced soft switching technology.
  • Synergic mode available
  • Spot/Stitch welding time can be set
  • Inductance control
  • 2/4 step function
  • Easy arc striking, less spatter stable current and excellent welding characteristics
  • Higher operating frequency and hence low volume and height
  • Excellent arc voltage and current feedback circuit
  • 100% Duty cycle and suitable for heavy industrial use
  • Higher efficiency and better power factor
  • Higher open circuit voltage
  • Digital Microprocessor based
  • Flux/Solid core selection
  • Pre flow, Post flow of gas can be set
  • Cratorfill function

BASIC OUTFITS

Power Source with Wheels,Wire Feeder with interconnection cable,MIG welding Torch,Regulator flow meter with Pre heater

Note: Package with Scope of Supply other than above is available on request.

Technical Specifications

Model COMBO 403i COMBO 503i
Rated Input Voltage 380 ~ 440 Volts 3phase 50 Hz 380 ~ 440 Volts 3phase 50 Hz
Input Power (KVA) 18.4 26.5
Output Voltage Range (GMAW) 14 ~ 40 14 ~ 50
Welding Current Range (A) 40 ~ 400 (GMAW) 60 ~ 500 (GMAW)
Duty Cycle (%) 100% (40?C and 10 Min) 100% (40?C and 10 Min)
Full Load Efficiency (%) 89% 89%
Power Factor 0.9 0.9
Weight (Kg) 41 44
Dimensions (L x W x H) mm 600 x 300 x 560 600 x 300 x 560
Insulation Grade H H
Wire Feeder
 
 
Wire Feed Speed (m/min) 1.3 ~ 21 1.3 ~ 21
Torch Connection EURO type EURO type
Motor Type Print Motor Print Motor
Wire Feed Four Roll Drive Four Roll Drive
Weight (Kg) 10 10

©Copyright 2020 Rajiv Machine Tools.     Developed by Kadri Consultancy.