AIRCUT – 162 IW

AIRCUT – 162 IW

INVERTER BASED AIR PLASMA CUTTING MACHINE - 162 IW

Aircut - 162 IWis inverter based Air plasma cutting machine. It is widely used for cutting ferrous as well as non ferrous metals using inexpensive compressed air as the cutting media.

KEY FEATURES

  • Advanced soft switching technology hence more reliability
  • High frequency arc striking with pilot arc
  • Pressure gauge on the front panel to check air supply
  • Stable output current
  • Good cutting quality
  • Built-in water circulation system
  • Precise preset & display of cutting current
  • Air test switch to set the air flow precisely
  • High power factor & efficiency
  • Continuous adjustment of current possible
  • Suitable for hand-held & mechanized torch

BASIC OUTFITS

  • Power source with inbuilt water cooling system
  • Water-cooled plasma cutting torch, 5 meters length
  • Air filter
  • Earthing cable with clamp
  • Guide roller, 3 Nos. of set tips & electrodes, Front ceramic / brass cap

Specifications / Technical data

Model Input Power (KVA) Cutting Thickness Current Range (A) No Load Voltage (DC) Duty Cycle Torch Cooling Type Glass Type Weight (Kg)
AIRCUT-162IW Power Source 32.5 CLEAN CUT IN MS, SS -50MM ROUGH CUT MS, SS -55MM PIERCING CAPACITY - 25 MM RECOMMENDED THICKNESS ON PUG MACHINE - 38MM 30-160 400 VDC 100% (40?C & 10 min) WATER AIR 100
Input supply 380 ~ 440 V 3 - phase 50 Hz supply
Efficiency - 85%, Power Factor - 0.85
Air pressure required in-5~6 Kg/cm2 or 0.4~0.6 MPa, Air Flow required (CFM) -5~6 or ?180 L/min
With attach WCS-400 (Water Cooling system)
Input supply - 230 Volts Single phase 50 Hz supply
Water tank made from heat resistant PVC material, Tank capacity - 24 Liter
Specially designed vortex pump with brass body which will avoid corrosion, Pump Capacity - 0.125 HP
Three stage copper tube cooling radiator system combined with separate, Radiator type & Size - 255 x 230 mm with
High speed fan ensures efficient heat transfer to keep the torches cool, Three stage copper pipes
Water level indication, Cooling fan - High speed

©Copyright 2020 Rajiv Machine Tools.     Developed by Kadri Consultancy.