Weldbrite Pickling Gel

Weldbright Pickling Gel

Specialty Chemical Manufacturer for Industry, Aviation and Retail

BENEFITS

• Quick acting
• One step treatment
• Completely water rinsable
• Can be used on vertical surfaces

Welbrite utilises innovative Australian technology for the formulation of a high adhesion stainless steel pickling gel. It is used to remove the black oxide marks or burn scale left during welding of stainless steel. After use of Welbrite the weld area should have the same look as the rest of the steel being used. Welbrite leaves a clean professionally finished stainless steel weld area.

PHYSICAL PROPERTIES

Boiling Point: N/A

Specific Gravity: 1.15

Water Solubility: miscible

pH(as supplied): <1.0

Appearance & Colour: Opaque, white acidic gel, pungent acidic odour

Weldbrite Pickling Gel

Is a strong ASTMA380 complaint formulation A thick high adhesion gel Effectively removes free iron Provides fast acting, one step descaling Completely water solube Supplied with application brush

Weldbrite Pickling Gel gives you

Rapid pickling and cleaning of weld area and the heat affected zone Enhancement of the auto passivation process Efficiency in fabrication Non residual treatment Easy to use, even on vertical surfaces

DIRECTIONS FOR USE

• Clean the weld area carefully using a stainless steel brush
• Shake the contents of the Weldbrite for 10-20 seconds prior to opening the container to ensure a smooth consistency, especially ifthe container has not been used for a long time.
• Ensure that the surface is cool before applying the Weldbrite paste.
• Apply the Welbrite gel to the area to be cleaned, using the brush provided.
• Leave the gel on for approximately 10 minutes. On some types ofstaineless steel this could take longer.
• To remove the gel, rinse with water, it may be necessary to scrub the area with a stainless steel compatible scotch brite pad to remove any visible etching to match the remaining surface.